On the tectonic origin of Iberian topography     

A.M. Casas-Sainz  G. de Vicente   《Tectonophysics》2009,474(1-2):214

The present-day topography of the Iberian peninsula can be considered as the result of the Mesozoic–Cenozoic tectonic evolution of the Iberian plate (including rifting and basin formation during the Mesozoic and compression and mountain building processes at the borders and inner part of the plate, during the Tertiary, followed by Neogene rifting on the Mediterranean side) and surface processes acting during the Quaternary. The northern-central part of Iberia (corresponding to the geological units of the Duero Basin, the Iberian Chain, and the Central System) shows a mean elevation close to one thousand meters above sea level in average, some hundreds of meters higher than the southern half of the Iberian plate. This elevated area corresponds to (i) the top of sedimentation in Tertiary terrestrial endorheic sedimentary basins (Paleogene and Neogene) and (ii) planation surfaces developed on Paleozoic and Mesozoic rocks of the mountain chains surrounding the Tertiary sedimentary basins. Both types of surfaces can be found in continuity along the margins of some of the Tertiary basins. The Bouguer anomaly map of the Iberian peninsula indicates negative anomalies related to thickening of the continental crust. Correlations of elevation to crustal thickness and elevation to Bouguer anomalies indicate that the different landscape units within the Iberian plate can be ascribed to different patterns: (1) The negative Bouguer anomaly in the Iberian plate shows a rough correlation with elevation, the most important gravity anomalies being linked to the Iberian Chain. (2) Most part of the so-called Iberian Meseta is linked to intermediate-elevation areas with crustal thickening; this pattern can be applied to the two main intraplate mountain chains (Iberian Chain and Central System) (3) The main mountain chains (Pyrenees and Betics) show a direct correlation between crustal thickness and elevation, with higher elevation/crustal thickness ratio for the Central System vs. the Betics and the Pyrenees. Other features of the Iberian topography, namely the longitudinal profile of the main rivers in the Iberian peninsula and the distribution of present-day endorheic areas, are consistent with the Tertiary tectonic evolution and the change from an endorheic to an exorheic regime during the Late Neogene and the Quaternary. Some of the problems involving the timing and development of the Iberian Meseta can be analysed considering the youngest reference level, constituted by the shallow marine Upper Cretaceous limestones, that indicates strong differences induced by (i) the overall Tertiary and recent compression in the Iberian plate, responsible for differences in elevation of the reference level of more than 6 km between the mountain chains and the endorheic basins and (ii) the effect of Neogene extension in the Mediterranean margin, responsible for lowering several thousands of meters toward the East and uplift of rift shoulders. A part of the recent uplift within the Iberian plate can be attributed of isostatic uplift in zones of crustal thickening.  相似文献   

X-ray Computed Tomography study of the influence of consolidants on the hydric properties of sandstones for stone conservation studies     

Vicente G. Ruiz de Argandoa  Lope Calleja  ngel Rodríguez-Rey  Luis Miguel Surez del Río  Carmen Celorio 《Engineering Geology》2009,103(3-4):69-75

X-ray Computed Tomography (X-ray CT) has been used to study the petrophysical characteristics of a Jurassic sandstone from Asturias (Northern Spain) used as building stone in several monuments in the region. CT monitoring of water capillarity tests has made it possible to visualize the movement of water inside the samples, to relate this movement with texture characteristics, and to measure the height reached in successive images, thereby determining the capillary penetration coefficient; based on this coefficient, the effective capillary pore radius has also been estimated. An advantage of the use of CT is that, as the information comes from the sample interior, border effects that can be generated in the external faces can be avoided.The CT was also used to visualize how a commercial organosilicon consolidant penetrates inside the rock by means of capillarity, a usual way of consolidant application in stone restoration processes. The coefficient of capillary penetration of the product, determined on the basis of the measurements made on the tomographic images, is 53% less than that of water. The influence of rock texture characteristics on the capillarity both of the consolidant and the water was also observed.The samples underwent CT water capillarity studies before and after the consolidant application, proving that the treatment improves the rock's hydric properties. The coefficient of capillary penetration decreased by 24% following the application of the consolidant, whereas the effective pore radius decreased by more than 40%.  相似文献   

Sediment resuspension in two adjacent shallow coastal lakes: controlling factors and consequences on phosphate dynamics   总被引：1，自引：0，他引：1  

Inmaculada de Vicente  Luis Cruz-Pizarro  Francisco J. Rueda 《Aquatic Sciences - Research Across Boundaries》2010,72(1):21-31

A combination of field measurements, modelling and laboratory experiments was used to evaluate the potential impact of sediment resuspension on phosphorus (P) dynamics. The study was carried out in two adjacent shallow coastal lakes (Lake Honda and Lake Nueva) which, due to their geographic proximity (only 200 m apart), are subject to equal meteorological forcing and represent ideal systems to study how morphometry and sediment properties relate to wind events. The focusing factors (a measure of the fluxes of sediment into the water column through resuspension) estimated by comparing settling fluxes measured in surface sediment traps with those measured in bottom traps, were significantly larger (approximately 34% larger) in Lake Honda (LH; 1.18) than in Lake Nueva (LN; 0.88). Our model estimates of resuspension fluxes (E) were also ca. 40% larger in LH than in LN, in agreement with the observed focusing factors. The larger resuspension fluxes encountered in LH, in comparison with LN, can mainly be explained by differences in lake morphometry. Still, they could arise from differences in grain size distribution or in benthic algae concentration encountered in the lake sediments. By means of adsorption experiments in the laboratory, we show that resuspension events will have different effects on P-dynamics in LH and LN. While the resuspended material from LH tends to adsorb phosphate (PO₄ ³⁻), removing it from the water column, in LN the resuspended sediments tend to increase the availability of PO₄ ³⁻ in solution. These differences arise from (1) higher concentrations of PO₄ ³⁻ in water in LH compared to LN; and (2) larger PO₄ ³⁻adsorption capacity of the LH sediments as a result of the more abundant iron oxyhydroxides and clay.  相似文献   

A high-resolution Holocene record on the Southern Brazilian shelf: Paleoenvironmental implications     

Michel Michaelovitch de Mahiques  Ilana Klein Coaracy Wainer  Leticia Burone  Renata Nagai  Silvia Helena de Mello e Sousa  Rubens Cesar Lopes Figueira  Ilson Carlos Almeida da Silveira  Mrcia Caruso Bícego  Daniel Pavani Vicente Alves   yvind Hammer 《Quaternary International》2009,206(1-2):52

A high-resolution, multi-proxy record has been used to determine the environmental changes during the Holocene on the southern Brazilian shelf. Present oceanographic conditions reveal wind and freshwater input as the determinants of short-term productivity changes in the study area. Magnetic susceptibility and grain-size variations, together with proxies of productivity (organic carbon, carbon accumulation rate, Ba, Sr, and Ca content, Ba/Al, Ba/Ti, and Al/Ti ratios) were analyzed and compared with proxies of redox condition (V/Ti ratio), terrigenous input (Fe/Ca and Ti/Ca ratios), as well as other Element/Ti ratios, to evaluate the paleoceanographic and paleoclimatic changes over the period.The core covers a time interval of about 7650 years, with sedimentation rates varying from 0.025 to 0.250 cm a⁻¹, which represent time intervals of between 8 and 80 a per sample. There is a clear change in the sedimentation rate at about 2800 B.P.All grain-size and elemental results indicate the occurrence of conspicuous changes between 5200 and 5000 cal. B.P., as well as between 3000 and 2800 cal. B.P. A comparison of the results with the palynological information available from the adjacent continental areas suggests that the sedimentary changes in this last interval may be correlated with the onset of modern climatic conditions in South America, and especially, with the onset of the Plata Plume Water, a water mass that carries cold, less saline waters towards the north. However, minor changes are observed at ca. 1500 B.P. and are correlated with an increase in the atmospheric humidity. Furthermore, a time-series analysis undertaken using several proxies indicated the occurrence of Sub-Milankovitch cycles, which may be compared with those reported worldwide.  相似文献   

Geodetic methods for detecting volcanic unrest: a theoretical approach     

José Fernández  José M. Carrasco  John B. Rundle  Vicente Araña 《Bulletin of Volcanology》1999,60(7):534-544

In this paper we study the application of different geodetic techniques to volcanic activity monitoring, using theoretical analysis. This methodology is very useful for obtaining an idea of the most appropriate (and efficient) monitoring method, mainly when there are no records of geodetic changes previous to volcanic activity. The analysis takes into account the crustal structure of the area, its geology, and its known volcanic activity to estimate the deformation and gravity changes that might precede eruptions. The deformation model used includes the existing gravity field and vertical changes in the crustal properties. Both factors can have a considerable effect on computed deformation and gravity changes. Topography should be considered when there is a steep slope (greater than 10°). The case study of Teide stratovolcano (Tenerife, Canary Islands), for which no deformation or gravity changes are available, is used as a test. To avoid considering topography, we worked at the lowest level of Las Cañadas and examined a smaller area than the whole caldera or island. Therefore, the results are only a first approach to the most adequate geodetic monitoring system. The methodology can also be applied to active areas where volcanic risk is not associated with a stratovolcano but instead with monogenetic scattered centers, especially when sites must be chosen in terms of detection efficiency or existing facilities. The Canary Islands provide a good example of this type of active volcanic areas, and we apply our model to the island of Lanzarote to evaluate the efficiency of the monitoring system installed at the existing geodynamic station. On this island topography is not important. The results of our study show clearly that the most appropriate geodetic volcano monitoring system is not the same for all different volcanic zones and types, and the particular properties of each volcano/zone must be taken into account when designing each system.  相似文献   

Analysis of the impact of large scale seismic retrofitting strategies through the application of a vulnerability-based approach on traditional masonry buildings     

Tiago Miguel Ferreira  Rui Maio  Romeu Vicente 《地震工程与工程振动(英文版)》2017,16(2):329-348

The buildings’ capacity to maintain minimum structural safety levels during natural disasters, such as earthquakes, is recognisably one of the aspects that most influence urban resilience. Moreover, the public investment in risk mitigation strategies is fundamental, not only to promote social and urban and resilience, but also to limit consequent material, human and environmental losses. Despite the growing awareness of this issue, there is still a vast number of traditional masonry buildings spread throughout many European old city centres that lacks of adequate seismic resistance, requiring therefore urgent retrofitting interventions in order to both reduce their seismic vulnerability and to cope with the increased seismic requirements of recent code standards. Thus, this paper aims at contributing to mitigate the social and economic impacts of earthquake damage scenarios through the development of vulnerability-based comparative analysis of some of the most popular retrofitting techniques applied after the 1998 Azores earthquake. The influence of each technique individually and globally studied resorting to a seismic vulnerability index methodology integrated into a GIS tool and damage and loss scenarios are constructed and critically discussed. Finally, the economic balance resulting from the implementation of that techniques are also examined.  相似文献   

Petrogenesis of the Paleoproterozoic basalt–andesite–rhyolite dyke association in the Carajás region, Amazonian craton     

Giorgio Rivalenti  Maurizio Mazzucchelli  Vicente Antonio Vitorio Girardi  Giancarlo Cavazzini  Cristina Finatti  Maria Adelaide Barbieri  Wilson Teixeira 《Lithos》1998,43(4):235-265

Paleoproterozoic basaltic, andesitic and rhyolitic dykes crosscut the Archaean Carajás basement. Basalts are distinguished into a high and a low TiO₂ group (HTi and LTi), each group consisting of geochemically distinct NE- and NW-trending swarms. The HTi dykes are evolved transitional basalts having essentially EMORB-type geochemistry. The LTi basalts are tholeiites (NE-trending swarm) and high-Al basalts (NW-trending swarm) displaying incompatible trace elements patterns with variably negative Nb anomaly, enrichment in Rb, Ba, K (LILE) and La, Ce and Nd (LREE) and positive Sr anomaly. With respect to orogenic analogues, andesites have lower Al₂O₃, CaO and Ni, higher FeO, LILE, LREE, Nb, Zr and Ti and negative Sr anomaly. Rhyolites have geochemical characteristics comparable with those of A-type granites. At 1.8 Ga, ranges from 0.700 to 0.705 in the HTi basalts and from 0.700 to 0.704 in the LTi group. Andesites define an isochron of 1874±110 Ma (Sr_o=0.7038±0.0010). Rhyolites from Southern and Northern Carajás define two isochrons of 1802±130 Ma (Sr_o=0.7062±0.0046) and 1535±82 Ga (Sr_o=0.7625) respectively, the younger date being interpreted as resetting of the Rb–Sr isotopic system. We propose a petrogenetic model relating LTi basalts with melting of lithospheric mantle metasomatized by acid melts derived from incipient melting of eclogites, representing in turn the subsolidus product of basaltic batches trapped in the mantle. The HTi basalts are explained by melting of the lithospheric mantle containing the complementary residual eclogite. Andesite petrogenesis is consistent with crystal fractionation from a high-Mg andesite parent derived from a mantle source more extensively metasomatized by eclogite-derived melts. Rhyolite composition is consistent with low melting degree of the basement rocks. The basalt–andesite–rhyolite dykes may represent the effects of crustal extension and arching in Carajás, which produced the anorogenic acid to intermediate magmatism (Uatumã group) and affecting a large part of the Amazon craton between 1.85 and 1.7 Ga.  相似文献   

Nannofossils: the smoking gun for the Canarian hotspot          下载免费PDF全文

Valentin R. Troll  Frances M. Deegan  Steffi Burchardt  Kirsten Zaczek  Juan‐Carlos Carracedo  Fiona C. Meade  Vicente Soler  Mario Cachao  Jorge Ferreira  Abigail K. Barker 《Geology Today》2015,31(4):137-145

The origin of volcanism in the Canary Islands has been a matter of controversy for several decades. Discussions have hinged on whether the Canaries owe their origin to seafloor fractures associated with the Atlas Mountain range or to an underlying plume or hotspot of superheated mantle material. However, the debate has recently come to a conclusion following the discovery of nannofossils preserved in the products of the 2011–2012 submarine eruption at El Hierro, which tell us about the age and growth history of the western‐most island of the archipelago. Light coloured, pumice‐like ‘floating rocks’ were found on the sea surface during the first days of the eruption and have been shown to contain fragments of pre‐island sedimentary strata. These sedimentary rock fragments were picked up by ascending magma and transported to the surface during the eruption, and remarkably retained specimens of pre‐island Upper Cretaceous to Pliocene calcareous nannofossils (e.g. coccolithophores). These marine microorganisms are well known biostratigraphical markers and now provide crucial evidence that the westernmost and youngest island in the Canaries is underlain by the youngest sediment relative to the other islands in the archipelago. This finding supports an age progression for the onset of volcanism at the individual islands of the archipeligo. Importantly, as fracture‐related volcanism is known to produce non‐systematic age‐distributions within volcanic alignments, the now‐confirmed age progression corroberates to the relative motion of the African plate over an underlying mantle plume or hotspot as the cause for the present‐day Canary volcanism.  相似文献   

Cytogenetics of Anodonta cygnea (Mollusca: Bivalvia) as possible indicator of environmental adversity     

J. Carrilho  A. Leitão  C. Vicente  I. Malheiro 《Estuarine, Coastal and Shelf Science》2008

Anodonta cygnea is a freshwater clam, belonging to the Unionidae family, which can be found in rivers and lagoons all over Europe and Northern America. As they appear as important case studies for ecological damage assessments, the various species of the Unionidae family have been submitted to a sort of recent studies on their chromosomal or cytogenetic status. In this study we confirmed the diploid chromosome number of 2n = 38 for this species, and established for the first time the karyotype, which comprised six metacentric, 12 submetacentric and one subtelocentric chromosome pairs. We also found a high percentage of cells with an abnormal number of chromosomes. Considering that karyotype disturbances in Unionids have been previously related with exposure to chemicals, either natural or produced by human activity, we determined the aneuploidy index for our population. The aneuploidy index is an excellent marker for pollutant presence/effect. The animals acclimatized in tap water and in natural water from the lake where the individuals were collected showed different levels of aneuploidy. The higher values were found in tap water. Chromosome analysis techniques seem a suitable tool to study the impact of contaminants referred above, and making A. cygnea a suitable organism for assessment of an eugenic damage in aquatic systems. On the other hand, our results also point out to the importance of doing the acclimatizing process of the collected animals in their own natural water.  相似文献   

Sr and Nd isotope composition of the metamorphic,sedimentary and ultramafic xenoliths of Lanzarote (Canary Islands): Implications for magma sources     

Alfredo Aparicio  Colombo C.G. Tassinari  Roberto García  Vicente Araña 《Journal of Volcanology and Geothermal Research》2010,189(1-2):143-150

The lavas produced by the Timanfaya eruption of 1730–1736 (Lanzarote, Canary Islands) contain a great many sedimentary and metamorphic (metasedimentary), and mafic and ultramafic plutonic xenoliths. Among the metamorphosed carbonate rocks (calc-silicate rocks [CSRs]) are monomineral rocks with forsterite or wollastonite, as well as rocks containing olivine ± orthopyroxene ± clinopyroxene ± plagioclase; their mineralogical compositions are identical to those of the mafic (gabbros) and ultramafic (dunite, wherlite and lherzolite) xenoliths. The ⁸⁷Sr/⁸⁶Sr (around 0.703) and ¹⁴³Nd/¹⁴⁴Nd (around 0.512) isotope ratios of the ultramafic and metasedimentary xenoliths are similar, while the ¹⁴⁷Sm/¹⁴⁴Nd ratios show crustal values (0.13–0.16) in the ultramafic xenoliths and mantle values (0.18–0.25) in some CSRs. The apparent isotopic anomaly of the metamorphic xenoliths can be explained in terms of the heat source (basaltic intrusion) inducing strong isotopic exchange (⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd) between metasedimentary and basaltic rocks. Petrofabric analysis also showed a possible relationship between the ultramafic and metamorphic xenoliths.  相似文献